Slab Support Safety Checklist Before Casting
Use this simple checklist before slab casting to review jack props, base plates, spacing, bracing and shuttering support.
Check Prop Alignment And Base Support
Props should stand straight with proper base contact. Uneven ground, tilted props and loose base plates can create problems during concrete placement.
Review Spacing And Load Areas
Prop spacing should follow the engineer-approved support plan. Extra care is needed near beams, edges, heavy pour zones and material loading areas.
Inspect Before Concrete Pour
Before casting, inspect pins, sleeves, U heads, bracing and shuttering plates. A short inspection can prevent avoidable delays and site risk.
A stable slab support setup depends on straight props, correct spacing and a final inspection before pouring concrete.
Safety Checklist
Slab Casting
Site Support